The 5D Thermal Aerosol Generator is designed for operators who require a wide range of aerosol output concentrations to perform leak tests on smaller clean air cabinets through cleanroom air handling systems.
Medical Facilities and Cleanrooms;
Independent Filter Certifiers;
High Aerosol Output;
Widest Range of System Flow Rates;
Minute Warm-up Time;
Safe and Reliable Operation.
Save time and money in the most demanding multi-filter cleanroom installations. In high-volume HEPA and ULPA air flow environments, the 5D can significantly reduce the time it takes to conduct filter leak test scans, generating aerosol concentrations that can challenge the largest Air Handling Unit (AHU) configurations. With 1- to 2-minute warmup and cool-down times, begin testing high-flow systems without waiting, and be ready to store and move the unit minutes after the job is complete.
The 5D components are housed in a stainless-steel enclosure designed to withstand the rigors of portable filtration-system certification. Its lightweight, slim profile and supplied hand and shoulder straps make it an everyday, portable aerosol generator.
Generating the widest aerosol concentration range available, the 5D accommodates both high- and low-flow environments, from cabinets1 to the most demanding cleanroom installations. And with flex-fuel capability, the 5D can use any reagent, including DOP (DEHP), PAO-4, DOS (DEHS), Ondina, or mineral oil.
Safe and Reliable
An innovative design minimizing system thermal requirements provides a faster, simpler, and safer alternative to other available solutions. The 5D is certified to comply with all applicable electrical and safety requirements, including CE and RoHS 2 standards.
1.Per NSF/ANSI 49, use 4B/4BL/6D laskin nozzle generators for biosafety cabinet testing.
43 cm x 12 cm x 36 cm
|Air flow rate (test system)||
849 – 118 900 m3/h
|Maximum generated concentration||
100 mg/m3 with air consumption in the system under test 11,890 m3/h; 10 mg/m3 with air consumption in the system under test 118 900 m3/h
|Maximum reagent consumption||
|Duration of work||
41 minutes (with maximum reagent consumption)
Complies with ANSI/ASME N509/510
ISO14644-3, CE RoHS 2 (2011/65/EU directive)