Pressure controller calibrator Presys PCON-Y17
The PCON-Y17 pressure calibrator is a ready-made solution for testing and calibrating pressure gauges, sensors and pressure switches, designed for the automated pressure control of a wide selection of ranges up to 3000 psi (pneumatic) found in instrumentation applications.
The generation of pressure and measurement of the DUT signal (analog or digital) is fully automatic without the need of a computer or other signal calibrator.
The controller provides a pressure with stability as low as 0.002% FS and with an accuracy of 0.012% FS, all of this at your fingertip and with a very friendly user interface.
No extra software or computer is needed to generate the calibration test report on the fly and the data are tamper proofed in accordance with 21 CFR Part 11.
With his communications facilities and his Open and Document Protocol, the PCON-Y17 calibrator will integrate with your application or your CMMS system.
-
PCON-Y17 offers up to three extra inputs for pressure reading;
-
The calibrator allows the measurement of mA, mV, Volts, Ohms and RTD signals;
-
Enables complete configuration of HART® devices. Compatible with DD configuration files registered in FieldComm Group;
-
The calibrator features full documenting capabilities. It stores its own calibration certificate and enables the creation of automatic calibration procedures;
-
e-Connected: Ethernet, Wi-Fi, Pen-drive, Hart, Modbus and USB Host/Device;
-
Leak test;
-
Temperature compensation in the range 0 °C ... +50 °C;
-
Speed control: 10 sec (with an error of 10% FS increase in pressure in 50 ml of the test volume).